Legislation is now in force which enables the UKCA marking to be placed on a label affixed to the product or on a document accompanying the product until 11pm on 31 December 2027. This means that as of 1 January 2028, in most cases, you must affix the UKCA marking to the product itself or to the packaging.The CE mark is the equivalent of the UKCA mark in the European Economic Area (EEA). It was used in the UK until we left the EU. For most products, the CE mark can continue to be used instead of, or as well as, the UKCA mark.Characteristics of UKCA marking
The height of the UKCA marking must be at least 5mm; it may be larger so long as the proportions are kept. The marking should be "easily visible, legible, and [from 1 January 2023] permanently attached to the goods".
What is the UK equivalent of the CE mark : From 1 January 2021, the UKCA mark will start to replace the CE mark for goods sold within Great Britain. The CE mark will continue to be required for goods sold in Northern Ireland. Units already in the supply chain at the time the new rules come into effect can continue to be sold under the old rules.
Which countries need CE mark
CE Mark is mandatory for the following 27 Member States of the EU:
| Austria | Belgium | Bulgaria |
|---|---|---|
| France | Germany | Greece |
| Hungary | Iceland | Ireland |
| Italy | Latvia | Liechtenstein |
| Lithuania | Luxembourg | Malta |
Can you sell in the EU without a CE mark : CE marking indicates that a product has been assessed by the manufacturer and deemed to meet EU safety, health and environmental protection requirements. It is required for products manufactured anywhere in the world that are then marketed in the EU.
CE marking indicates that a product has been assessed by the manufacturer and deemed to meet EU safety, health and environmental protection requirements. It is required for products manufactured anywhere in the world that are then marketed in the EU.
The most basic difference is that the CE mark, and UKCA mark demonstrate that a product or service meets legal requirements, whereas the BSI Kitemark is a mark of trust and confidence, demonstrating a level of quality, safety, sustainability and/ or security over and above any basic legal requirements.
What are UKCA labels
The UK Conformity Assessed (UKCA) marking is a new UK product marking used for goods being placed on the market in Great Britain (England, Wales, and Scotland). It covers most goods that previously required the CE marking, known as 'new approach' goods.The UK Conformity Assessed mark is a mandatory mark on a product to indicate that it conforms to GB legislation. The manufacturer or, if mandated, their authorised representative will be responsible for affixing the UKCA mark to the product, which is the same principle as CE marking but for the GB market.For aerosol dispensers, UKCA marking is mandatory in the UK in contrast to the EU market. Aerosol Dispensers placed on the European market may not bear CE-marking. Products that are not in the scope of one or more of UKCA marking regulations and or directives may not bear the UKCA mark.
Products placed on the market in Great Britain must be UKCA marked, regardless of their origin with one exception: businesses in Northern Ireland will be in the unique position of being able to ship Qualifying Northern Ireland Goods certified to either the EU (CE mark) or UK (UKCA mark) rules into Great Britain.
Why do we need UKCA : UKCA marking is a similar provision as the CE marking, however applicable for UK laws and the UK market. It must be considered as an implicit declaration from the manufacturer or brand-owner that his product complies with all UK laws and the applicable British conformity assessment procedures.
Is CE Recognised in UK : The CE marking is already recognized in Northern Ireland. Businesses there will continue to have unrestricted access to the market in Great Britain and the EU single market. As such, the CE marking will be an acceptable method of demonstrating compliance for a wide range of goods on the UK market.
What products need CE UKCA marking
Products that need CE marking
- active implantable medical devices.
- appliances burning gaseous fuels.
- cableway installations designed to carry persons.
- eco-design of energy related products.
- electromagnetic compatibility.
- equipment and protective systems intended for use in potentially explosive atmospheres.
If so, you need to ensure it complies with UKCA requirements. This involves identifying the specific regulations that apply to your product, assessing it against these regulations, compiling a detailed technical file and creating a Declaration of Conformity to prove compliance.Almost all products that require a CE mark or a UKCA mark don't require a third-party assessment. However, the self-certification procedure and requirements are different for each individual product, so it can be difficult to gather all relevant information and design the risk assessment right.
Is CE certification accepted in Europe : Many products require CE marking before they can be sold in the EU. CE marking indicates that a product has been assessed by the manufacturer and deemed to meet EU safety, health and environmental protection requirements. It is required for products manufactured anywhere in the world that are then marketed in the EU.